Under-rack cleaning

Cleaning under pallet racking, without the kneeling.

The gap under the bottom beam of a pallet rack is about 20 cm high. It collects dust, packaging and dropped stock, and cleaning it by hand means kneeling with brushes and extension poles. ARTIC V2 is a 170 mm robot that drives beneath the racking, sweeps the floor and docks to charge itself.

ARTIC on the concrete floor of a warehouse aisle beside red pallet racking.

The problem

Why the floor under racking gets missed.

Too low for people

About 20 cm to work in

Cleaning it by hand means staff on their knees with brushes and extension poles, so it is done less often than anyone wants.

Too low for machines

Scrubbers stop at the rack

Commercial cleaning robots and ride-on scrubbers are too tall to get under the bottom beam, so they clean the aisle and stop there.

Out of sight

Dust and stock pile up

Dust, packaging and dropped stock collect where nobody looks, and almost nobody cleans the space properly.

How ARTIC cleans under racking

Five steps, bay by bay.

  1. We survey and map your racking

    We measure the clear height of every bay, including beam deflection under load, and check floors and gradients. You approve the cleaning map before the robot runs.

  2. ARTIC lowers its LiDAR and drives under

    Its body is 170 mm high. The 2D LiDAR on top lowers into the body before ARTIC passes beneath a beam with 190 mm or more of clear height.

  3. Brushes sweep, a vacuum catches the dust

    Two brushes sweep debris in ahead of the bin, while a centrifugal vacuum inside the bin draws in fine dust. Dry debris only.

  4. It steers around your stock

    Anything taller than about 20 mm is seen and avoided. Recognition of your own packaging is added before go-live, and every item ARTIC steers around is marked on the map with its bay, position and a photo.

  5. It charges itself and carries on

    It cleans for up to six hours, returns to its dock at a set charge level or at the end of its route, and resumes where it stopped. An optional station empties its bin into a standard wheelie bin.

Debris

What it collects, and what it leaves.

ARTIC is a dry under-rack sweeper. The site survey maps exactly where it cleans.

Illustration: ARTIC under a pallet rack shines a detection cone onto a small boxed product on the floor, labelled Product Detected.
Debris under racking
CollectsDust, grit, sand, paper, label backing, small cardboard and wood chips. Fine dust is drawn in by the vacuum as the brushes sweep.
Steers around and marksPallet blocks, broken boards, cartons and anything too large for the bin opening, marked on the map for removal. Your products, marked with bay, position and a photo so they go back on the shelf.
AvoidsLong strands such as strapping and film, which could wrap around the roller. The roller lifts out without tools for clearing.
Not forLiquids, oil, spills and wet cardboard. ARTIC is a dry sweeper.

Clearance

Will your racking fit? 190 mm decides it.

ARTIC needs at least 190 mm of clear height under the bottom beam or pallet base. Its body is 170mm high, and the survey measures every bay, including beam deflection under load. Bays with pallets standing directly on the floor cannot be entered.

Front view of ARTIC on a concrete warehouse floor, with pallet racking behind it.

The ARTIC series

Proven beneath racking in live warehouses.

ARTIC has cleaned beneath racking in live operation at client warehouses, with no racking changes, no stock moved and no floor markings. Those floors shaped ARTIC V2: brushes ahead of the vacuum, up to six hours on a charge and emptying with no manual handling.

Get started

Start with a survey of your floor.

We map your warehouse, racking and shelving, measure clearances, floors and gradients, and you approve the cleaning map before anything runs.

Book a site survey