FAQ

Questions about ARTIC V2, answered.

What buyers ask us most about cleaning under racking and shelving with ARTIC V2. Anything else, ask us directly.

Fit and floors

Will it work on our site?

How much clear height does ARTIC need?

At least 190 mm under the bottom beam, pallet base, bottom shelf or pod base. The robot is 170 mm high, and the site survey measures every bay, including beam deflection under load.

How to measure your clear height

Can it clean bays where pallets stand on the floor?

No. Bays with pallets or stock standing directly on the floor cannot be entered.

What floors does it need?

Sealed concrete or a similar hard, level floor. Uneven or broken floor is surveyed first. It handles gradients up to about 5%; ramps, dock levellers, raised thresholds, cable protectors and floor tracks are set as boundaries unless they are flush.

Does it work in chilled or frozen areas?

ARTIC V2 is built for ambient warehouses. Chilled, frozen and washdown areas are outside its current specification.

Cleaning

What does it clean, and what does it leave?

What does it pick up?

Dry debris: dust, grit, sand, paper, label backing, small cardboard and wood chips. Brushes sweep it in ahead of the bin, and a centrifugal vacuum inside the bin draws in fine dust.

What it collects and what it leaves

Can it clean up spills or wet floors?

No. ARTIC is a dry sweeper. Liquids, oil, spills, sludge and wet or damp cardboard are not for it.

What happens to pallet blocks and other large items?

Anything too large for the bin opening cannot get in. Pallet blocks, broken boards and cartons are avoided as obstacles and marked on the map for your team to remove.

What about strapping and film?

Long strands could wrap around the roller, so ARTIC avoids long items. If something does wrap, the roller lifts out without tools for clearing.

Your stock

Will it pick up our products?

How does it avoid sweeping up stock?

In three layers. It avoids: anything taller than about 20 mm is seen and steered around, and the bin opening keeps large items out. It recognises: its camera is taught your own packaging before go-live. It recovers: every item it steers around is marked on the map.

What are the items most at risk?

Small, flat items, such as a bagged pack of clips or a blister card lying flat. That is why recognition of your products and slow or no-go zones for bays known for loose stock are part of every installation.

How do we get dropped stock back?

Every product ARTIC steers around is marked on the site map with its bay, position and a photo. Your operators see each mark and collect the item, so it goes back on the shelf instead of staying under the racks.

How long does it take to teach it our products?

About four weeks, using samples and photographs of your packaging. It is done before go-live, so recognition is running when ARTIC starts work.

Safety

Is it safe around people and forklifts?

Can it work while people and forklifts are about?

ARTIC runs in zones and time windows agreed with you. The safety case for shared operation is developed with your health and safety team, and slow areas and no-go areas are set on the map.

What happens if the wireless link drops?

ARTIC comes to a controlled stop and waits for the link to return. It does not keep working without supervision.

Where does it drive when it goes to charge?

To its dock, along the aisles you have allowed on the map.

Is the charging dock safe to stand next to?

Charging only starts after the robot and the dock have confirmed each other, so the contacts are not live while the dock is empty. The dock has no network connection.

Running it

What does it take to run?

How long does it run on a charge?

Up to six hours. It returns to its dock at a set charge level or at the end of its route, charges in about two hours, then resumes where it stopped. These figures are nominal and vary with floor condition and cleaning load.

Who empties the bin?

Your team, or nobody: the optional self-emptying station lifts the robot's bin and tips it into a standard wheelie bin.

What power does the dock need?

A standard mains socket, UK or EU 230 V or US 120 V. It draws under 1 kW, needs no dedicated circuit and takes floor space against a wall; the dock measures 420 × 150 × 160 mm.

What maintenance does it need?

It is covered by Closed-Site Service: a monthly report produced on site, a mid-year health check with consumables sent ahead of need, and a yearly visit where brushes, filters and seals are renewed and sensors recalibrated.

The service year

Network and data

Does it need the internet?

Does ARTIC need an internet connection?

No. Operation, updates, support and analytics all work without one. Maps, schedules, the Mission Control console and reports run on a small server installed at your site, on a VLAN of your network or a fully isolated one.

How is the software updated?

Once a year we send a signed release, and your own team installs it through Mission Control under your change control. The signature is checked before installing, and every release has a tested rollback.

What data does it keep?

Maps, schedules and reports stay on the on-site server. Product-detection snapshots are kept for 30 days. Nothing leaves your site unless your team sends it.

Getting started

How do we start?

What happens before ARTIC runs on our floor?

A site survey, a security review for your IT team, about four weeks of product recognition, then installation and go-live with your staff trained. Nothing runs until you have approved the cleaning map.

From survey to service

What do you need from us?

A site contact and access for the survey, sample items or photographs of the products most likely to end up under your storage, and time from your health and safety and IT teams.

Book a site survey

Get started

Start with a survey of your floor.

We map your warehouse, racking and shelving, measure clearances, floors and gradients, and you approve the cleaning map before anything runs.

Book a site survey